Select 30/20 DMX LED System
Price excluding V.A.T
The Select LED’s have the versatility and unique features which make it the perfect imaging tool for use in any studio production or on location. The detachable controller can operate the fixtures remotely with a 25ft (*m) extension cable. For further flexibility, the controller can be attached to the back of the fixture or mounted onto a stand using the ballast mount (MTP-BAL)) accessory. Slim in profile at only 3 inches, the portable lightweight fixture can be rigged in tight places or screwed onto a wall or ceiling through its eyelets.
The Select LED lights include dial-in variable color temperature control, full-range dimming and programmable 2700K to 6500K presets. The Select LED’s soft white light is flicker-free and does not shift color temperature when dimmed. Light levels are consistent throughout the Kelvin range.
In addition, Kino Flo introduces a Green/Magenta control to match the spectral sensitive curves of the most popular cameras and other light sources. With built-in DMX and Lumen Radio® receivers, the Select LED’s can be controlled by DMX and/or wireless DMX. Wireless capability eliminates the need for DMX cables. Rounding out the Select LED’s attributes is the ability to run on universal input from 100-240VAC, or 24VDC with as little 1.3A, 120VAC.
The Select LED System consists of four components:
Select LED Fixture (fig. 1), Mounting Plate (fig. 2), LED Controller (fig.3), and Extension Cable (fig.4).
It was designed in this manner to allow the greatest flexibility in lighting solutions for challenging situations.
The Select LED fixture includes a removable 90° Louver. The fixture has a twist-on mating plate to accept a removable twist-on Center Mount. The remote Controller can also be attached to the back of the fixture with Velcro.
One of the design features that makes the fixture so popular is the twist-on removable Center Mount. When it's on, the fixture mounts easily to a light stand; when it's off, the fixture is flat and can be hand-held, or hidden in a space too small to place a stand-mounting fixture. When the mount is removed, the grommet holes along the edge of the fixture are designed to allow the fixture to be screwed to a wall or ceiling through its eyelets.
Jednou z konštrukčných vlastností, ktoré robia toto svetlo tak populárne je odnímateľný stredový úchyt - placka. Keď je nasadený na svetle, tak zaručuje ľahké nasadenie na statív, keď je odnaté tak svetlo je ploché a môže byť držané v rukách, schované v malom priestore, ktorý je príliš malý na to aby sa svetlo nasadilo na statív. Po okrajoch obalu svetla sa nachádzaju otvory vďaka, ktorým je možné svetlo uchytiť, alebo priskrutkovať na stenu alebo strop.
The standard mount comes with a Baby Mount that mounts onto a baby stand. The ball and socket mount allows the fixture to be oriented in a broad range of angles. There is also a short version and mount w/ 3/8" pin (see below) available as accessories. The yellow wire loops are there to provide attachment points for a safety chain.
4Bank mounting options include MTP-KF41 Mount with 3/8" Pin (10mm); MTP-BC41 Mount with Baby Receiver (16mm); MTP-BF41S Mount with Baby Short (16mm).
4Bank montážne možnosti zahŕňajú MTP-KF41 Úchyt s 3/8" Pinom (10mm); MTP-BC41Úchyt s Baby Receiver (16mm); MTP-BF41S Úchyt s Baby Short (16mm).
MTP-L Kino 41 Lollipop w/ 3/8” Pin
MTP-LBC Kino 41
Lollipop w/ Baby Receiver Curve (16mm)
MTP-LBS Kino 41
Lollipop w/ Baby Receiver Short (16mm)
Note: The lollipops on all of these mounts are interchangeable.
MTP-KF41 Mount with 3/8" Pin (10mm);
MTP-BC41 Mount with Baby Receiver Curve (16mm);
MTP-BF41S Mount with Baby Short (16mm).
2Bank montážne možnosti.
MTP-KF41 Úchyt s 3/8" Pinom (10mm);
MTP-BF41 Úchyt s Baby Receiver (16mm);
MTP-BF41S Úchyt s Baby Short (16mm).
A 180° turn loosens the orientation of the mount.
A right turn tightens the mount.
180° otočenie do ľava slúži na uvoľnenie
doprava na pritahnutie uchytenia.
The tension on the lock lever may be adjusted by pulling the handle away from the mount.
This disengages the handle from the screw mechanism and allows the lever to be reoriented.
Napätie na páku zámku môže byť nastavená vytiahnutím rukoväte smerom od držiaka.
Tento uvoľní rukoväť skrutky a umožní zmeniť polohu rukoväte.
A Ballast Baby Mount (MTP-BAL) is available as an accessory.
The MTP-BAL can be used with a Mafer clamp to mount the ballast onto a stand, for example.
Úchyt na balast (MTP-BAL) je tiež dostupný ako príslušenstvo.
Napríklad môže byť použitý s klemou na uchytenie napríklad na statív.
The Select LED Controller includes state of the art features with dial-in variable color temperature control, full-range dimming and programmable 2700-6500K presets. It operates flicker-free and does not shift color temperature when dimmed. Light levels are consistent throughout the Kelvin range. The controller can be used remotely with a 25ft extension cable or can easily be attached to the back of the Select LED fixture with Velcro.
With built-in DMX and Lumen Radio® receivers, the Select LED’s can be controlled by DMX and/or wireless DMX with DMX auto terminate.
In addition, the LED Controller features a Green/Magenta adjustment to match the spectral sensitive curves of the most popular cameras and other light sources. The energy efficient LED Controller runs on universal input voltage from 100-240VAC at only 1.3A (120VAC)
(Select 30) or can also operate 24VDC using only 7A.
Select 150 LED Controller Control Panel
A) On / Off: On = Green light displayed. Off = Red light displayed.
B)Menu: Provides General Setup, DMX Setup, Wireless DMX Setup.
C)Kelvin Preset Buttons: Kelvin buttons come preset at the factory. Factory defaults left to right are: 2700K, 3200K, 5000K and 6500K. User acan also use these preset buttons to store custom Kelvin and Hue settings.
D) Display: Provides Kelvin, Dim level, Hue and DMX channel.
E) Lock: In Lock mode, a red light is displayed. To reset Kelvin to factory presets, hold the Lock button for 3 seconds.
F) Mode: Selects Hue, DMX, Dim and Kelvin settings.
G) Micro USB: For software updates
H) Dimmer Knob: Manually adjusts Kelvin or Dim levels Hue and DMX channels. Press the knob to toggle between fine and coarse adjustments.
Note: Each Select 150 DMX Controller has an “AUTO TERMINATE” feature. The last fixture that does not have an XLR cable attached to the DMX “Out” port will automatically terminate.