none

Fixtures w/ Remote Ballasts // Sveteľné zariadenie s ovládacím predradníkom

2ft Single SYS-2401-230U

none

2ft Single System, Univ 230U
(Includes Single Fixture, Ballast, Mounting
Plate, 25ft Head Extension)

4ft Single System, Univ 230
(Obsahuje Lampu,Predradník,Placku,
25 stopový predlžovací kábel)

The 1-Lamp Fixture// 1-trubicové svetlo

  • Built-in Barndoors
  • Removable Lamp Harness, Reflector and Louver
  • Twist-on, locking Center Mount
  • True Match® daylight and tungsten lamps
  • Zabudované klapky
  • Odnímateľný postroj, Reflektor, a Voštinu
  • Twist-on, placku
  • True Match® denné a ranné trubice

The universal Single portable lighting system comes in a slender package but delivers ample light for challenging spaces such as set practicals or automobile interiors. Single Systems feature:

fadeIn

Single System Highlights

  • 1-Lamp remote fixture w/ built-in barndoors
  • Fixture includes removable Lamp Harness, Reflector and Louver
  • 1-Lamp remote fixture w/ built-in barndoors
  • Fixture includes Reflector, Louver, and removable Harness
  • Same fixture takes daylight and tungsten lamps, plus visual effects color lamps
  • Mounts to stand, light enough to tape to wall
  • Removable center mount
  • Fixture or lamps w/ harness run up to 75 feet (24 meters) from ballast
  • High output, flicker-free ballasts
  • Universal input voltage from 100-240VAC can be used anywhere in the world
  • Instant-on, dead quiet
  • HO/Std switching
  • Low amperage draw at 0.6A/120VAC, 0.3A/230VAC
  • Same ballast runs 4ft and 2ft lamps *UL listed, CE approved
  • UL listed, CE approved

Single System Includes // 1 trubicový DMX systém obsahuje

slideInLeft

Single System // 1 trubicový systém

The Single System was designed as a softlight source that could be plugged into the wall on location. With its narrow profile and size, the Single could approximate the quality of light from bounced sources without losing set space.

The first thing to note about the Single System is that it consists of four components: Single Fixture (fig. 1), Mounting Plate (fig. 2), Ballast (fig. 3) and Extension Cable (fig. 4). It was designed in this manner to allow the greatest flexibility when working on film production where the gaffer and DP are constantly being challenged to light unique locations and problem solve at a moment's notice.

The Single fixture // 1 trubicové svetlo

The Single fixture houses the lamp and is comprised of a removable Louver, Reflector, and Lamp Harness. The Louver and Reflector are held in place with Velcro fasteners. There is a strain relief on the lamp harness to ensure the connectors don’t pull off the lamp during operation. To get the harness away from the fixture, turn the ¼ turn fastener and rotate counter-clockwise to release.

fadeIn

The Harness wiring is color-coded. The same color-code must match at each end of the lamp for proper operation.

Trubicový káblový zväzok je farebne označený. Farba sa musí zhodovať na oboch stranách aby lampy riadne fungovali.

fadeIn
none
none
fadeIn

Fixture can be used in several configurations: // Svetlo môže byť použité v niekoľkých konfiguráciách

1) Complete fixture with all components combined.

2) "Harness Only"
The wiring harness is removed from the fixture so that the user can build a softbox, hide behind Plexiglass or rig into tight locations. The wiring harness uses Kino Flo designed lamp connectors that grab the lamp pins so lamps can be operated independently of the fixture.

3) "Harness + Reflector"
Same as above, but may want to use the reflector to give more punch and direction to the light.

4) Can use Louver to give direction to the light or remove louver to give broad coverage over an area, such as lighting blue and green screens etc.

The fixtures can take a variety of lamps. They can be used as a daylight source by using Kino Flo KF55 lamps or a tungsten source using Kino Flo KF32 lamps. A variety of visual effects for blue and green screen as well as designer colors are available.

Kino Flo lamps are color-correct and safety-sleeved. The lamps are safety-sleeved because they can operate inside the fixture or independently with only the wiring harness. Additionally, on a production set the lamps are often changed out. The safety-sleeving offers protection during lamp changes for the user as well as the talent on the set.

1) Kompletné svietidlo so všetkými súčasťami

2) "Len káblový zvätok"
Káblový zväzok sa odstráni z držiaka tak, že užívateľ môže vytvoriť softbox, ktorý môže skovať sa plexisklo alebo priamo alebo upevniť v tesných lokáciách. Káble používaju Kino flom navrhnuté trubicové konektory, ktoré sa uchytia na trubicové kolíky, takže trubice sa dajú použiť nezávysle od obalu svetla.

3) "Káblový zväzok + reflektor"
To isté ako v bode číslo 2 len s tým rozdielom, že niektorý chcú používať aj reflektor na usmernenie a zvýraznenie svetelného toku.

4) Može sa použit mriežka na zmenšenie a usmernenie svetelného uhla, alebo nepoužiť čo zabezpečí široký uhol svietenia , napríklad pri zelenom alebo modrom kľúčovaní.

Do svetla sa dá použiť niekoľko druhov trubíc. Možu byť použité ako zdroj denného svetla S trubicami KF55 alebo ranného svetla S KF32, zelené a modré na kľúčovanie, alebo niekoľko druhov rôznych farieb.

Kino Flo trubice sú farebne korektné a potiahnuté ochrannou fóliou. Táto ochranná fólia zabezpečuje aby pri náhodnom rozbytí trubice nedošlo k úrazu.

Mounting // Uchytenia

none

One of the design features that makes the fixture so popular is the twist-on removable Center Mount. When it's on, the fixture mounts easily to a light stand; when it's off, the fixture is flat and can be hand-held, or hidden in a space too small to place a stand-mounting fixture. When the mount is removed, the grommet holes along the edge of the fixture are designed to allow the fixture to be screwed to a wall or ceiling through its eyelets.

Jednou z konštrukčných vlastností, ktoré robia toto svetlo tak populárne je odnímateľný stredový úchyt - placka. Keď je nasadený na svetle, tak zaručuje ľahké nasadenie na statív, keď je odnaté tak svetlo je ploché a môže byť držané v rukách, schované v malom priestore, ktorý je príliš malý na to aby sa svetlo nasadilo na statív. Po okrajoch obalu svetla sa nachádzaju otvory vďaka, ktorým je možné svetlo uchytiť, alebo priskrutkovať na stenu alebo strop.

none

The standard mount comes with a 3/8" lollipop that clamps into a grip head. The ball and socket mount allows the fixture to be oriented in a broad range of angles. There is also a longer baby-stand mount and a short version (see below). The yellow wire loops are there to provide attachment points for a safety chain.

Štandartný úchyť prichádza s 3/8" lollipopom - na upevnenie do grip head - hlavy. Gulička zaručuje natáčanie svetla do veľa možných uhlov. Je tu aj možnosť dlhšieho baby-stand upevnenia alebo kratšieho. Žlté káblové očko na obale slúži na pripevnenie ochrannej retiazky.

none

Single mounting options include MTP-KF41 Mount with 3/8" Pin (10mm); MTP-BF41 Mount with Baby Receiver (16mm); MTP-BL41S Mount with Baby Short (16mm).

1Bank montážne možnosti zahŕňajú MTP-KF41 Úchyt s 3/8" Pinom (10mm); MTP-BF41Úchyt s Baby Receiver (16mm); MTP-BL41S Úchyt s Baby Short (16mm).

none
none

MTP-L Kino 41 Lollipop w/ 3/8” Pin
MTP-LB Kino 41 Lollipop w/ Baby Receiver
MTP-LBS Kino 41 Lollipop w/ Baby Receiver Short

Single mounting options include
MTP-KF41 Mount with 3/8" Pin (10mm);
MTP-BF41 Mount with Baby Receiver (16mm);
MTP-BF41S Mount with Baby Short (16mm).

1Bank montážne možnosti.
MTP-KF41 Úchyt s 3/8" Pinom (10mm);
MTP-BF41 Úchyt s Baby Receiver (16mm);
MTP-BF41S Úchyt s Baby Short (16mm).

none

A 180° turn loosens the orientation of the mount.
A right turn tightens the mount.

180° otočenie do ľava slúži na uvoľnenie
doprava na pritahnutie uchytenia.

none

The tension on the lock lever may be adjusted by pulling the handle away from the mount.
This disengages the handle from the screw mechanism and allows the lever to be reoriented.

Napätie na páku zámku môže byť nastavená vytiahnutím rukoväte smerom od držiaka.
Tento uvoľní rukoväť skrutky a umožní zmeniť polohu rukoväte.

none

A Ballast Baby Mount (MTP-BAL) is available as an accessory.

The MTP-BAL can be used with a Mafer clamp to mount the ballast onto a stand, for example.

Úchyt na balast (MTP-BAL) je tiež dostupný ako príslušenstvo.
Napríklad môže byť použitý s klemou na uchytenie napríklad na statív.

The Single Ballast // Single predradník

fadeIn
fadeIn

All the features of the Single fixture would be useless if Kino Flo had not developed its own ballasts that could run the fixture heads remotely. Unlike conventional architectural ballasts that need to operate three feet to six feet from the fixture head, Kino Flo ballasts can operate the fixture heads from up to 75 feet (3 x 25ft extension cables).

The Kino Flo Single ballast is a high output, high frequency electronic ballast with universal input voltage from 100-240VAC that can operate two lamps (4ft or 2ft) up to 75 feet between ballast and fixture. The ballast sends a high output current to the lamps to drive the light as brightly as possible. Its high frequency electronics prevent any type of flicker as well. Custom electronic engineering ensures stable operation without magnetic hum or cooling fans to interfere with the sound recording on set.

Všetky funkcie Single svetla by boli zbytočné, pokiaľ by Kino Flo nevyvinul vlastné predradníky, ktoré umožňujú ovládanie svetla.Bežne dostupné predradníky umožňujú prevádzku svetla na vzdialenosť 3 až 6 stôp. cca 1 až 2 metre, Kino Flo balasty umožňujú ovládanie svetla až do 75 stôp cca 22,5metra (3 x 25ft predlžovací kábel).

Kino Flo Single predradník je vysoko výkonný,vysokofrekvenčný elektronický predradník s univerzálnym vstupným napätím 100-240VAC, ktorý umožňuje napájanie dvoch trubíc (4ft alebo 2ft) až na vzdialenosť 75 stôp. Predradník posiela vysoký prúd priamo do trubíc aby svietili čo najjasnejšie. Vysoká frekvencia elektroniky zaručuje ochranu pred akýmkoľvek blikaním svetla.Vlastná elektronika zaisťuje stabilnú prevádzku, bez magnetického rušenia alebo ventilátorov, aby nerušili nahrávanie zvuku na pľaci.

There is no delay when switching lamps. The ballast operates the lights on/off instantly. There is also a special Select switch to raise or drop the wattage in the tubes for light output and color control. Keeping the ballast remote from the fixture and lamps makes the controls more accessible to lighting crews who might need to rig the fixtures into set designs or high up in a lighting grid, but switch them easily from a convenient location on the stage floor.

The Kino Flo Single ballast accomplishes all this and still out performs tungsten lighting instruments when it comes to energy efficiency. In other words, the ballast uses less power to produce the same amount of soft light as incandescents. The double ballast draws only 1.3A at 120VAC and 0.7A at 230VAC. The ballast works reliably under most normal conditions, but it's also trustworthy in more harsh conditions, such as extreme cold. The ballast series is designed to operate at temperatures from 14F to 122F (-10C to +50C).

In extremely cold temperatures, the ballast may not strike the lamp(s) initially because the lamp may need to warm up. Switch the ballast to Off, wait seven seconds and try again. If the ballast does not strike after two or three attempts, turn off the ballast, check that the extension and harness connections are secure and re-strike. Once operating for a few minutes, the lamps should re-strike instantly.